+86-312-6775656
Zariadenie na testovanie bodu vzplanutia HZBS-002 Abel Close Cup

Zariadenie na testovanie bodu vzplanutia HZBS-002 Abel Close Cup

Charakteristika HZBS-002 je navrhnutý podľa ISO13736 a IP 170 metódou Abelovho uzáveru, je vhodný na stanovenie bodu vzplanutia ropných produktov a iných horľavých kvapalín s bodom vzplanutia medzi -30 stupňami a 70 stupňami. Presnosť tejto metódy platí len pre body vzplanutia...
Product Details ofZariadenie na testovanie bodu vzplanutia HZBS-002 Abel Close Cup

 

Charakteristika

HZBS-002 je navrhnutý podľa ISO13736 a IP 170 metódou Abelovho uzáveru, je vhodný na stanovenie bodu vzplanutia ropných produktov a iných horľavých kvapalín s bodom vzplanutia medzi -30 stupňami a 70 stupňami. Presnosť tejto metódy je platná len pre body vzplanutia v rozsahu -5 stupňov a 66,5 stupňov. Neplatí pre vodou riediteľné farby.


Hlavné charakteristiky:

◆ Temperature rise controlled by SSR, which can satisfy requirements of different heating rate.

◆ Continuously stirring the sample and stirring is auto stopped during igniting.

◆ Electrical controlled ignition.

◆Test cup lid with stirring device can be disassembled freely..


Hlavné parametre

Test temperature range: -30 degree 18.5 degree if equipped with cooling bath(-30 degree 18.5 degree if equipped with cooling bath

19 stupňov 70 stupňov pri normálnej pracovnej teplote

Výkon vykurovania: 0 450W nastaviteľný

Rýchlosť nárastu teploty: 1 stupeň/min

Plameň je možné nastaviť na 34 mm

Rýchlosť výpletu: nastaviteľná 0-40 kotúčov/min


Prevádzka

Príprava

Po úspešnom uvedení do prevádzky môže prístroj spustiť normálnu prevádzku. Postupy testovania nájdete v norme testovacej metódy ASTM.

Rýchlosť ohrevu

Load sample as requirement, turn on "POWER" and "RUN": button, adjust voltage dial to heat the sample, observe thermometer reader, and adjust the voltage suitably so as to meet the test requirement.

Rýchlosť zvyšovania teploty: 1 stupeň/min

Skúšobná podmienka

Get through the gas source and ignite the ever-light flame and pilot flame, adjust the size of pilot flame to 3mm-4mm, and adjust ever-light flame to a little bigger. Press "FIRE" for 1 second, the pilot flame will be descended.

When test operation is complete, adjust voltmeter back to "0", turn off "RUN", switch off gas source, remove all liquid medium in the bath.

image012

image014

image016

Request for quote_

Populárne Tagy: HZBS-002 Abel Close Cup Testovacie zariadenie bodu vzplanutia, Čína, dodávatelia, výrobcovia, cena, na predaj, Abel Closed Cup Tester bodu vzplanutia, abel poloautomatický tester bodu vzplanutia, abel poloautomatický testovací prístroj bodu vzplanutia

Zaslať požiadavku

(0/10)

clearall